Dimplex DX 410EP Installation And Operating Instructions Manual page 12

English
NOTE NOTE
To exit the program early, press the PROG key.
Copying programs
To copy the newly set programs P1 - P4 to other days,
proceed as follows.
After carrying out the Temperature Setting, press
and hold the ENTER key until COPY appears.
Press + to select more weekdays.
The selected weekdays are marked with a triangle
displayed permanently. The days Monday to Friday
are selected on the screen at the top.
Deselect weekdays with the - key.
Press the ENTER key. The settings are saved.
COPY flashes three times.
Setting is complete.
9.3 Frost protection
In MANUAL OFF operating mode and Auto operating
mode (time block OFF), frost protection takes place. If
the room temperature is 5° C or less, the heating
device is switched on automatically.
.
EN-5
DX 410E - DX 430E, DX 410EP, DX 420EP
9.4 Adaptive startup
This function guarantees that, in automatic mode
(week program), the set room temperature is achieved
exactly at the start of the switch-on time.
Example:
In the timer menu, a set room temperature of 22°C is
specified. The current room temperature is 17° C. The
heating device switches on early so that the specified
room temperature of 22° C is reached by 07:00.
Use the MODE key to select the operating mode
AUTO.
Press and hold the + key and the - key for three
seconds.
ECO appears.
Activate/deactivate the function with the + / - keys:
ON = Adaptive startup activated,
OFF = Adaptive startup deactivated.
Press the ENTER key. Setting is saved.
1908/E www.dimplex.de/en