Jtpm1: Tpm Module Connector; Jci1: Chassis Intrusion Connector - MSI B450M PRO-VDH V2 Manual

JTPM1: TPM Module Connector

This connector is for TPM (Trusted Platform Module). Please refer to the TPM
security platform manual for more details and usages.
2 14
1
13

JCI1: Chassis Intrusion Connector

This connector allows you to connect the chassis intrusion switch cable.
Normal
(default)
Using chassis intrusion detector
1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.
Resetting the chassis intrusion warning
1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.
1 LPC Clock
3 LPC Reset
5 LPC address & data pin0
7 LPC address & data pin1
9 LPC address & data pin2
11 LPC address & data pin3
13 LPC Frame
2 3V Standby power
4
6
8
10
12
14
Trigger the chassis
intrusion event
Overview of Components
3.3V Power
Serial IRQ
5V Power
No Pin
Ground
Ground
15