Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint RD 1176 J

  • Page 1: Table Of Contents

    Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 RD 1176 J General safety Disposal Description of the washer-dryer, 8-9 Control panel Display...
  • Page 2: Installation

    Installation ! Keep this instruction manual in a safe place 2. If the floor is not perfectly level, compensate for future reference. Should the appliance be for any unevenness by tightening or loosening the adjustable front feet (see figure); the an- sold, transferred or moved, make sure the gle of inclination, measured according to the instruction manual accompanies the washer-...
  • Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washer- ding it, to a draining dryer’s plug.
  • Page 4: The First Wash Cycle

    As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
  • Page 5: Technical Data

    Technical data Model RD 1176 J width 59.5 cm Dimensions height 85 cm depth 60,5 cm from 1 to 11 kg for the wash programme Capacity from 1 to 7 kg for the drying programme Electrical please refer to the technical...
  • Page 6: Care And Maintenance

    Care and maintenance Cutting off the water and electri- Cleaning the pump city supplies The washer-dryer is fitted with a self-cleaning • Turn off the water tap after every wash cycle. pump which does not require any maintenan- This will limit wear on the hydraulic system ce.
  • Page 7: Precautions And Tips

    Precautions and tips • ! This washer-dryer was designed and constructed in Make sure that the water tap is turned on during accordance with international safety regulations. The fol- the drying cycles. • Children of less than 3 years should be kept lowing information is provided for safety reasons and must away from the appliance unless continuou- therefore be read carefully.
  • Page 8: Description Of The Washer-Dryer

    Description of the washer-dryer MULTI RINSE Control panel DRY ONLY DIRECT FUNCTION button (DRYING ONLY) INJECTION button ON/OFF button button button DISPLAY START/PAUSE DRYING button with indicator light Programme button KEY LOCK WASH button Detergent dispenser drawer AUTO CYCLE CLEAN DELAY SELECTOR button...
  • Page 9 Display COTTON 2:55 90° 1200 -- h The display is useful when programming the machine and provides a great deal of information. The following will appear in area A: the icon and programme selected, the washing and drying phases and time remaining to the end of the cycle.
  • Page 10: How To Run A Wash Cycle Or A Drying Cycle

    1. SWITCH THE MACHINE ON. Press the On/Off button the selected cycle. The drying level or time may be set and the text HOTPOINT will appear on the display and the START/ changed by pressing the drying button . (Not compati- PAUSE indicator light will flash slowly in a green colour.
  • Page 11: Wash Cycles And Functions

    Wash cycles and functions Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) ANTI CREASE 1 Daily Wash & Dry (Daily Mix Wash & Dry) 40°    2 Shirts Wash & Dry 40°...
  • Page 12: Detergents And Laundry

    Detergents and laundry Detergent dispenser drawer Pre Iron: use this programme immediately before ironing; max. 1.5 kg load. The use of the steam in this programme Good washing results also depend on the correct dose of is optimised to reduce the formation of creases on gar- detergent: adding too much detergent will not necessarily ments, making them easier to iron.
  • Page 13: Troubleshooting

    Troubleshooting Your washer-dryer could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Product Guaran- tee and Repair Information”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on.
  • Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
  • Page 15: Product Guarantee And Repair Information

    Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Hotpoint reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage.
  • Page 16 195140854.02 10/2016 Indesit Company Spa Viale Aristide Merloni, 47 60044 Fabriano (AN) Italy www.hotpoint.co.uk...

Table of Contents