Table of Contents
Advertisement
USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Evap Fan (excludes ZWC)
Up
Down
The Evap Fan option in the service menu allows servicers
to change the Evaporator Fan runtime (in minutes) from 0
to 98 and OFF cycle time 0 to 98.
To access Evap Fan
1. Press
to select "Evap Fan".
2. Press
.
3. Press
and
to scroll through available settings.
To exit the Evap Fan menu, press
Menu" and press
to confirm.
Mullion (Drawer Models)
Up
Down
The Mullion (MULL) option in the service menu allows
servicers to change the ON/OFF time in minutes of the
MULL heater (DWR only) from 0 to 98.
To access Mullion
1. Press
to select "MULL".
2. Press
.
3. Press
and
to scroll through available settings.
To exit the MULL menu, press
Menu" and press
to confirm.
Select
RETURN TO MENU
EVAP FAN
EVAP FAN ON = 1
EVAP FAN OFF = 60
to select "Return to
Select
RETURN TO MENU
MULL
MULL ON = 5
MULL OFF = 30
to select "Return to
Factory Default
Up
Down
Factory Default will restore all settings to their factory
default.
To access Factory Default
1. Press
to select "Factory Default".
2. Press
.
To restore settings to their factory default.
3. Press
to select "Restore?" and press
4. "Restore?" will change to "Restoring..." while settings
are restored. When restoration is complete,
"Restoring..." will return to "Restore?".
To exit Factory Default, press
Menu" and press
to confirm.
Re-Select Model
Up
Down
NOTICE
Before altering model selection U-Line customer
service must be notified. Failure to notify
customer service will result in voiding of the
manufacturer warranty.
58
Select
RETURN TO MENU
FACTORY DEFAULT
RESTORE?
to select "Return to
Select
RETURN TO MENU
RE-SELECT MODEL #
3018R
Control Operation - Service 6
Advertisement
Table of Contents
Troubleshooting
