Brother 888-V60 Operation Manual page 67

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d Slide the feed dog position lever, located at the
rear of the machine on the base, to
the right as seen from the front of the machine).
a Feed dog position lever
(as seen from the rear of the machine)
The feed dogs are lowered.
e Turn on the sewing machine, and then select a
stitch.
f Use both hands to hold the fabric taut, then
move the fabric to follow the pattern.
Reinforcement stitches are sewn at the
beginning and end of sewing.
a Pattern
g After sewing is finished, slide the feed dog
position lever to
the front of the machine) and turn the
handwheel to raise the dogs.
• Normally, the feed dog position lever is
positioned at
(to
(to the left as seen from
.
3
65