Adjusting External Device Connections - JVC LT-50MAR635 User Manual

this mode to view HDR content from the device connected to this HDMI
However, note that many older HDMI
® input is set to this mode.

Adjusting external device connections

You can choose the level of control you want to allow your TV to accept from
external devices, such as smart phones, tablets, and virtual assistants. Device connect
settings enable other devices, including the Roku Mobile App, to control your TV over
the local area network in your home.
To adjust the level of external control access:
1. From the Home screen menu, navigate to Settings > System > Advanced
system settings > Control by mobile apps.
2. Select Network access.
3. Choose one of the following settings:
•
Default
accept commands only from other private network addresses on your
home network. This setting is suitable for most cases, including use of the
Roku mobile app on your smartphone.
•
Permissive
commands only from private network addresses or the same subnetwork
within your home network. This setting might be required when attempting
to operate the TV from a third-party application, for example, one of the
Internet of Things (IoT) applications such as ifttt.com.
•
Disabled
accept external commands from any source, including the Roku mobile app.
Devices can connect only through a private network address, and
Devices can connect under all conditions, but accept
Device connection is completely disabled. The TV does not
® devices do not work correctly when the
128
®
input.