Tv And Operating Buttons; Viewing The Connections - Back Connectors - JVC LT-32DA30J Instructions Manual

TV and Operating Buttons

FRONT and REAR VIEW

Viewing the Connections - Back Connectors

HDMI 2: HDMI Input
HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has a HDMI socket. Your TV is capable of displaying
High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD Player. These
devices must be connected via the HDMI or Component source. These sockets can accept either 720p
or 1080i signals. No sound connection is needed for a HDMI to HDMI connection.
RF Input connects to an aerial antenna system.
Note: If you use a decoder or a media recorder, you should connect the aerial cable through the device to
the television with an appropriate antenna cable, as shown in the illustration in the following pages.
SCART input or output for external devices. Connect the SCART cable between the SCART socket on the
TV and the SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note: S-VHS signal is supported via the scart socket (optional).
Note: When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not
be available via the scart socket.
Control buttons VIEW
- 9 -
Control Buttons
Standby/On button
TV/AV button
Programme Up/Down buttons
Volume Up/Down buttons
Note: Press "
buttons at the same time to view
main menu.
" and