BenQ FP93G X+ User Manual page 11

3. Remove the rear cover.
Slide the rear cover back toward you to remove it. The screw
plate at the back of the monitor could be revealed.
4. Follow the instruction manuals of the wall mount
bracket you purchased to complete the installation.
To attach the rear cover:
1. Tilt the rear cover forward and insert the two tabs on
the front edge into the recesses of the screw plate.
No tools are required.
2. Position the two tabs on left side of the rear cover to
fit into the grooves in the screw plate.
3. Push the other two tabs on the right side of the rear
cover inward so that they could snap into the aligned
grooves.
There will be a clicking sound as the rear cover is
perfectly attached.
How to assemble your monitor hardware 11