Table of Contents
Advertisement
6. The upgrade process can be started by pressing START button. The program verifies
the current firmware version, then waits for the user to confirm the upgrade:
7. Selecting „Yes" will start the upgrade. The whole process takes about 1 minute. If you
select „No", then no change in the firmware will be done.
8. As the upgrade is completed, load back the program data with the EniTerm software.
(see section 6. Programming the communicator with PC).
To be able to use the latest features and options, it might be necessary
to obtain the latest version of the EniTerm software. The EniTerm
software can be donwloaded from
www.villbau.com
for free.
Advertisement
Table of Contents
