Rio SALON LASER LAHC4 Information Manual page 5

© The Dezac Group 2011
Enter the security button sequence by pressing the buttons (highlighted in black) in the following order:
1
© The Dezac Group 2011
If the sequence is entered correctly the unit will emit 2 beeps and the keyswitch will stop flashing and light green. The lowest
power level will light blue and the x60, x20 and SINGLE buttons will flash blue ready for selection.
© The Dezac Group 2011
Note: The unit will power off if the code is incorrectly entered (the keyswitch will change from flashing green to flashing orange
and the unit will emit two low beeps). Turn the key off, wait a few seconds and then turn the key back on and re-enter the
button sequence.
SE CU RI TY B UTT ON S EQU ENCE
2 3
3 3
4