Toshiba Satellite CL15-B Series User Manual page 92

Please make sure to use the default Boot Mode option in the BIOS
setup utility before restoring.
1.Launch the BIOS setup utility.
Please refer to the
information.
3. In the BIOS setup screen, select Advanced -> System
Configuration -> Boot Mode.
Note: Please skip the following contents if you cannot find the Boot
Mode option in your system.
4. Select UEFI Boot (Default).
If you set the Boot Mode as CSM Boot, the recovery media created by
Recovery Media Creator will NOT be able to restore.
If you create a recovery image using advanced recovery tools from
Control Panel, please also make sure to use the default Boot Mode
option (UEFI Boot) in the BIOS setup utility before restoring.
1. Load the Recovery Media into the external optical disc drive or insert
the recovery USB Flash Memory into one available USB port.
2.
Click the power icon (
3. Hold down the F12 key and then release this key one second after the
computer is power on.
4. Use the up and down cursor key to select the appropriate option from
the menu according to your actual recovery media.
A menu will be displayed from which you should follow the on-screen
5.
instructions.
For models without Recovery Media Creator pre-installed:
Refresh your PC and Reset your PC buttons will be displayed as
options for recovery. However, only Yes, repartition the drives under
Reset your PC is supported when booting from the recovery media.
For detailed information, please refer to the Windows Help and
Support.
If you have previously chosen to remove the recovery partition without
creating "Recovery Media", the "Recovery Media" cannot be created.
However, if you have already created a "Recovery Media", you can use it
to restore the recovery partition.
If you have not created "Recovery Media", please contact TOSHIBA
support for assistance.
User's Manual
TOSHIBA Setup Utility section for further
) on the Start screen and then select Restart.
5-15