Page 1
PLA585R PLA985R PLA1485R prepaid shipped returning When your relating appear must R.A.# (718) number warranty obtain will unit your product Should limited...
When you check the list of features offered by the PLA585R, PLA985R , and PLA1485R, you’ll know you made the right choice with a Pyle Blue Wave amplifier. high level mono input connections...
blue wave crossover mode selector when used with normal, full range systems, set this switch to “FULL.” If you wish to use the internal crossover to power a driver of specific frequency range, use the “LOWPASS” or “HIGHPASS” settings. input level control use this control to match the outputs of your head unit to the amplifier.
Page 5
blue wave crossover mode selector when used with normal, full range systems, set this switch to “FULL.” If you wish to use the internal crossover to power a driver of specific frequency range, use the “LOWPASS” or “HIGHPASS” settings. input level control use this control to match the outputs of your head unit to the amplifier.
Page 6
3/4 high pass frequency control ch 3/4 crossover mode selector switch pla1485R ch 3/4 input level control ch 3/4 bass boost level control ch 3/4 low pass frequency control ch 3/4 low level inputs...
blue wave low level inputs using pla585R pla985R from spealer terminals blue wave low level inputs using pla585R pla985R To a second amplifier To a second amplifier wiring harness stereo input connections 2 c h a m p s P L A 5 8 5 R • P L A 9 8 5 R REMOTE BASS BOOST POWER...
4 CH input connections using pla1485R blue wave 4 CH floating ground connections pla1485R ORANGE BLACK BLACK ORANGE PLEASE NOTE! If using high level inputs, do not use the low level RCA inputs at the same time! 2/4 channel input connections...
4 CH mono input connections using pla1485R blue wave 4 CH floating ground connections pla1485R ORANGE BLACK BLACK ORANGE PLEASE NOTE! If using high level inputs, do not use the low level RCA inputs at the same time!
Your new Pyle Blue Wave Series amplifier comes complete with all required mounting hardware. When determining a suitable location in your vehicle for the amp, please remember that it is a high-power electronic device capable of generating high heat.
The built-in protection circuitry in the Pyle Blue Wave amplifiers will disable the amplifier if it senses an input overload, a speaker short circuit, or extreme temperature conditions. When the protection circuit is activated by any of these conditions, the Protection LED will be illuminated.