Download Print this page
Pulsar PWE2001V Operator's Manual

Pulsar PWE2001V Operator's Manual

2000psi electric pressure washer

Advertisement

Quick Links

Model No.: PWE2001V
2000PSI ELECTRIC PRESSURE WASHER
OPERATOR'S MANUAL
DO NOT RETURN TO STORE!
STOP
HAVE QUESTIONS OR NEED SERVICE?
866-591-8921
support@pulsar-products.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the PWE2001V and is the answer not in the manual?

Questions and answers

Summary of Contents for Pulsar PWE2001V

  • Page 1 Model No.: PWE2001V 2000PSI ELECTRIC PRESSURE WASHER OPERATOR’S MANUAL DO NOT RETURN TO STORE! STOP HAVE QUESTIONS OR NEED SERVICE? 866-591-8921 support@pulsar-products.com...
  • Page 2: Table Of Contents

    2000PSI Pressure Washer Table Of Contents Topic Page # Important Safety Tips, Precautions, W arnings, and U sage Instructions Assembly Instructions Operating Instructions 10 -12 Detergents Clean-up and Storage 14-17 Technical Data Troubleshooting Tips...
  • Page 3: Important Safety

    2000PSI Pressure Washer GROUND FAULT CIRCUIT INTERRUPTER (GFCI) This pressure washer is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection.
  • Page 4 2000PSI Pressure Washer IMPORTANT SAFETY PRECAUTIONS WARNING! When using this product, basic precautions should always be followed, including the following: 1. Read all instructions before using the product. Save all safety instructions. 2. Do not operate the pressure washer when fatigued or under the influence of alcohol or drugs.
  • Page 5 2000PSI Pressure Washer Read all instructions included with the mask so you are certain the mask will provide the necessary protection against inhaling harmful vapors. 5. Before starting the pressure washer in cold weather, check all of the parts of the equipment and be sure that ice has not formed.
  • Page 6 2000PSI Pressure Washer WARNING! – To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch the plug with wet hands. PROPER USE OF THE PRESSURE WASHER THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY! DO NOT USE HOT WATER IN THIS PRESSURE WASHER.
  • Page 7: Assembly Instructions

    2000PSI Pressure Washer ASSEMBLY INSTRUCTIONS Unpacking The Carton After opening the carton, please remove all parts and check them against the following list of components that are included: A. High Pressure Washer B. Gun C. High Pressure Hose D. Adjustable Nozzle E.
  • Page 8 2000PSI Pressure Washer STEP 1 Align the holes on the handle to the body of the pressure washer. Then using the 4 screws provided, screw the handle to the pressure washer from the back of machine with a screwdriver (not included).
  • Page 9 2000PSI Pressure Washer STEP 2 With hook oriented as seen, slide the hook on the housing dovetail.
  • Page 10 2000PSI Pressure Washer STEP 3 Attach the pressure hose to the gun fitting as shown below and tighten. STEP 4 Adjustable Spray Nozzle Insert the adjustable spray nozzle into the gun. Push and turn the adjustable nozzle clockwise onto the gun until it is hand tight and to lock it in place. When the pieces are joined properly, you cannot separate the two components by pulling out on the adjustable nozzle.
  • Page 11: Operating Instructions

    2000PSI Pressure Washer OPERATING INSTRUCTIONS THIS UNIT IS INTENDED TO BE USED WITH COLD WATER ONLY! DO NOT USE HOT WATER IN THIS PRESSURE WASHER! Starting After connecting the pressure washer to your cold water supply, proceed as follows: • Make sure that the ON/OFF switch is in the OFF position. •...
  • Page 12 2000PSI Pressure Washer motor on the pressure washer will automatically shut off. Simply squeeze the trigger again to resume using the washer. To stop using the pressure washer, release the trigger and switch the unit to the OFF position. The unit should be turned completely OFF while not in use or while unattended.
  • Page 13 2000PSI Pressure Washer Diagram 2 Diagram 1 Detergent Nozzle The detergent nozzle will allow you to apply many forms of liquid detergent onto the work surface.Detergent application happens at low pressure only. Fill the container with detergent only Do not put any water into the container. The pressure washer will mix water and detergent automatically.
  • Page 14: Detergents

    2000PSI Pressure Washer Using Detergents Biodegradable detergents are specifically formulated to protect the environment and your pressure washer. These detergents will not clog the filter and will protect the internal parts of the pressure washer for a longer life. STEP 1 Open the cover of the detergent bottle by twisting it off.
  • Page 15: Clean-Up And Storage

    2000PSI Pressure Washer Clean-up And Storage Shutting Down the Pressure Washer WHEN FINISHED USING THE PRESSURE WASHER,FOLLOW THESE STEPS TO SHUT DOWN THE UNIT: • Turn the pressure washer to the OFF position. • Turn off the water supply. • Before disconnecting high-pressure hose connection, point the gun in a safe direction and discharge the high-pressure water.
  • Page 16 2000PSI Pressure Washer Winterizing and Long-Term Storage FOLLOW ALL OF THE ABOVE SHUT-DOWN PROCEDURES, ADDING THE FOLLOWING STEPS…. • After disconnecting the water supply, and before disconnecting the high-pressure hose, turn the pressure washer on for 2-3 seconds, until any remaining water in the pump exits.
  • Page 17 2000PSI Pressure Washer Cleaning Tips WARNING ! ALWAYS TEST THE SPRAY IN AN AREA FREE AND CLEAR OF PEOPLE AND OBJECTS BEFORE YOU AIMING AT THE INTENDED CLEANING SURFACE. Wood and Vinyl Decks Rinse deck and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure.
  • Page 18: Technical Data

    2000PSI Pressure Washer Barbecue Grills, Power Equipment, and Garden Tools Rinse the area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure . Allow the detergent to remain on the surface for a few minutes, but do not let the detergent dry.
  • Page 19: Troubleshooting Tips

    2000PSI Pressure Washer Troubleshooting Tips WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START Probable Cause Solution Electrical socket is faulty Check plug, socket, and fuses Voltage is inadequate Check that the voltage is adequate GFCI trips Reset / Try another outlet Power cord is not plugged in Plug in power cord...