Dell P157G003 Service Manual page 47

Steps
1. Install the system board at an angle and ensure that the ports are properly aligned with the port openings.
2. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
3. Replace the three screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.
4. Connect the power-button cable to the system board and close the latch.
5. Connect the power-adapter port cable to the system board.
6. Adhere the tape that secures the power-adapter port cable to the system board.
Removing and installing components 47