Off Timer
Off
Timer: Turn on
Off Timer
mode.
Turn Off
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer
to activate, go to
SETUP&RESET
and set
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― This function does not support
Analog
mode.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor (when set to HDMI) is in power saving mode or is displaying the message
press the
button to display the On Screen Display(OSD). You can select
is set to On.
Off Timer
is set to automatically activate 4 hours after the
Off Timer
to Off.
Check Signal
PC
or AV.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
when a button is pressed.
Source Detection
Select either
Auto
or
Manual
as the method to recognize input signal.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•
Working: The power LED is on when the product is turned on.
•
Stand-by: The power LED is on when the product is turned off.
Cable,
No Repeat
is selected, a command responds only once
30