Appendix; Specifications - Samsung HW-K470 User Manual

APPENDIX

SPECIFICATIONS

Model name
USB
Weight
GENERAL
Dimensions
(W x H x D)
Operating Temperature Range
Operating Humidity Range
Rated
Output
Power
AMPLIFIER
S/N Ratio (Analog Input)
Separation (1kHz)
Supported play formats
(DTS 2.0 sound is played in DTS format.)
Wireless BT max transmitter power
device
SRD max transmitter power
output power
* Design and specifications are subject to change without prior notice.
* S/N ratio, distortion, separation, and usable sensitivity are based on measurements using AES (Audio Engineering
Society) guidelines.
* Nominal specification
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-
Weight and dimensions are approximate.
-
For more information about the power supply and power consumption, refer to the label attached to the product.
-
a Open Source Licence Notice
To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
-
• Hereby, Samsung Electronics, declares that this equipment is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://www.samsung.com go to Support > Search Product Support and enter
the model name.
This equipment may be operated in all EU countries.
HW-K470
Main Unit
Subwoofer (PS-WK450)
Surround Speaker
Rear (Surround) AMP (SWA-8000S) 0.8 Kg
Main Unit
Subwoofer (PS-WK450)
Surround Speaker
Rear (Surround) AMP (SWA-8000S) 50.0 x 201.3 x132.0 mm
Main Unit
Subwoofer (PS-WK450)
Rear (Surround) AMP (SWA-8000S) 80 W/CH x 2, 3ohm, THD=10%
31
5V / 0.5A
2.0 Kg
4.6 Kg
0.5 Kg
908.5 x 53.5 x 70.5 mm
179.0 x 361.0 x 299.5 mm
76.2 x 126.9 x 76.2 mm
+5°C to +35°C
10 % to 75 %
40W/CH x 4, 6ohm, THD=10%
140W, 3ohm, THD=10%
65 dB
65 dB
LPCM 2ch, Dolby Audio™
(supporting Dolby® Digital), DTS
100mW at 2.4GHz – 2.4835GHz
25mW at 2405.35MHz – 2477.35MHz
APPENDIX