Table of Contents
Advertisement
Configure the Router
This chapter will show you how to configure the Router to function in your network and gain access to the Internet
through your Internet Service Provider (ISP). The RCA DCW615's Web-based Utility." Your ISP may require the
use of a Host Name and Domain Name. You will need the setup information from your ISP. If you do not have this
information, please contact your ISP before proceeding.
The instructions from your ISP will tell you how to set up your PC for Internet access. Because you are now using
the Router to share Internet access among several computers, you will use the setup information to configure the
Router instead of your PC. You only need to configure the Router once using the first computer you set up.
1.
Open your web browser. (It is all right if you get an error message at this point. Continue following these
directions,) Enter http://192.168.100.1 in the browser's Address field. Press the Enter key.
2.
An Enter Network Password window, shown in below figure, will appear (For Windows XP users, the screen
may look different). Leave the User Name field empty, and enter admin in lowercase letters in the Password
field (admin is the default password). Then, click the OK button.
26
Advertisement
Table of Contents
