Advertisement
Quick Links
Alarm Clock with Time Projection
CR1001F
CREATE YOUR PERFECT SLEEP ENVIRONMENT
Chapter 1 LOCATION OF CONTROLS
1 2
3 4
12
13
14
15
17
18
1.SET TIME BUTTON
2.HOUR BUTTON
3.MINUTE BUTTON
4.DIMMER/DST BUTTON
5.SNOOZE/OK BUTTON
6.ALARM 1
7.ALARM 2
8.ALARM ON/PAUSE
9.PROJECTION ON/FLIP/OFF
10.VOLUME+ BUTTON
11.VOLUME- BUTTON
12.AM INDICATOR
5
6 7
8 9
17
10
16
11
21
23
22
19
20
13.PM INDICATOR
14.ALARM 1 INDICATOR
15. ALARM 2 INDICATOR
16. DST INDICATOR
17. FOCUS RING
18. BATTERY COMPARTMENT
19. USB PORT
20. DC JACK
21.SPEAKER
22.HOLDER ( x 2pcs)
23. PROJECTION DIMMER
- 01 -
Contact our experts
support@mesqool.com
Http://www.mesqool.com
Chapter 2 POWERING ON
1. Install 2pcs 1.5V "AAA" size batteries to the proper terminals in
the battery compartment to memorize the time/alarm setting in
case of power outage.
Note: Without AC power in, batteries don't support time display ,but alarm
will still goes off.
2. Connect the adapter line to DC jack , then plug into a 100~240V
AC wall power outlet.
Made in China
- 02 -
Version 3.0
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mesqool CR1001F
Summary of Contents for Mesqool CR1001F
- Page 1 Contact our experts support@mesqool.com Http://www.mesqool.com Alarm Clock with Time Projection CR1001F CREATE YOUR PERFECT SLEEP ENVIRONMENT Version 3.0 Made in China Chapter 1 LOCATION OF CONTROLS Chapter 2 POWERING ON 1. Install 2pcs 1.5V “AAA” size batteries to the proper terminals in the battery compartment to memorize the time/alarm setting in case of power outage.
- Page 2 Chapter 4 ALARM SETTING Chapter 3 TIME SETTING 1. Press button, the alarm indicator will light up, ALARM 1. Press button once, display starts flashing. the display starts flickering. TIME 2. Press button to set the hour. press button to set 2.
Need help?
Do you have a question about the CR1001F and is the answer not in the manual?
Questions and answers
What does the dst button do?
The DST button on the Mesqool CR1001F adjusts the brightness of the display and switches the DST (Daylight Saving Time) function when held down.
This answer is automatically generated
hOW DO i GET THE ALARM OFF PERMANENTLY
HOW DO i GET ALARM OFF PERMANENTLY?
To permanently turn off the alarm on the Mesqool CR1001F, hold the ALARM button until the alarm indicator disappears from the display. This ensures the alarm will never go off. Repeat the same process for ALARM 2 if needed.
This answer is automatically generated
The clock has worked perfectly. Now it flashes and unable to set time or anything. Unplugged and it still just flashes. Is there anything to do to troubleshoot to get the clock working again?
To troubleshoot the Mesqool CR1001F clock that is flashing and won't set the time, follow these steps:
1. Power Check: Ensure the clock is connected to a working 100–240V AC power outlet using the adapter. Batteries alone do not support time display.
2. Time Setting:
- Press the TIME button once until the display starts flashing.
- Press the HOUR button to set the hour.
- Press the MINUTE button to set the minutes.
- Press the SNOOZE button or wait 10 seconds to confirm the time.
3. Reset the Clock: If the issue persists, remove the batteries and unplug the power adapter for a few minutes, then reconnect and set the time again.
4. Check Display Settings: If the display remains flashing, try adjusting the DIMMER button or ensure the clock is not in alarm-setting mode.
If the problem continues, consider replacing the batteries or testing with a different power outlet.
This answer is automatically generated