Jbat1: Clear Cmos (Reset Bios) Jumper; Jtbt1: Thunderbolt Add-On Card Connector; Jrtd3: Intel Rtd3 Connector - MSI MAG B460 TORPEDO Quick Start Manual

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Resetting BIOS to default values
1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and Power on the computer.

JTBT1: Thunderbolt Add-on Card Connector

This connector allows you to connect the add-on Thunderbolt I/O card.

JRTD3: Intel RTD3 Connector

This connector allows you to connect the RTD3 connector on the add-on Thunderbolt
I/O card that supports RTD3.
Keep Data
(default)
1
1 FORCE_PWR
3 SLP_S3#
5 Ground
1
JRTD3
1 WAKE 2
3 GND
Clear CMOS/
Reset BIOS
JTBT1
2 SCI_EVENT
4 SLP_S5#
PWR EN
Overview of Components
37