D-Link AirPlus XtremeG DWL-G810 Manual page 15

Configuration Menu
Channel: Channel 6 is the default channel. Input a new number if you
want to change the default setting. All devices on the network must be set to
the same channel to communicate on the network.
WEP Encryption: Select Enable Encryption to use WEP (Wired Equivalent
Privacy) on the network. All devices on the network, and the Access Point,
must share the same WEP selection – either Enable or Disable, and they
must share the same WEP key. The WEP key is generated from ASCII or
Hexadecimal entries that are either 64, or 128 bits in length. When enabling
encryption, select the Key Type (ASCII or Hexadecimal) and then input the
appropriate digits or letters. You can create up to 4 keys. Select the key
you wish to use.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code
for representing English letters as numbers from 0-127
Transmission Rate: Select the transmission rate for the network. There are
several options for you to choose: Auto, 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48,
and 54. The default setting is Auto.
Authentication:
Open System – communicates the key across the network
Shared Key – devices must have identical WEP settings to
communicate
Auto – automatically adjusts to the Authentication mode of the
wireless client
Click Apply if you have made any changes or additions.
15