4.4.1
How to Remove and install the HDD
How to Remove
(1) Shift the central part of the lever on
left-hand side with a minus driver
etc., and remove the lever from the
hook.
(2) pulled out HDD slowly with a lever.
The following thing is followed in case HDD is dealt with.
• It avoids near the ferromagnetic substances, such as a speaker, an external
magnetic field is received and twisted, and it is made like.
• Don't push an HDD cover.
• It has the side of HDD, as more than a human body ground (500kohm) is taken and
a print board cannot be touched.
(use a wristband)
6F8C1118
hook
HDD
CAUTION
4.3
Replacing the Hard Disk Drive
How to install
(1) A label makes it the direction which
becomes a right-hand side, and inserts
HDD in a slot.
connector
(2) If it inserts to the back of a slot, push the
central part of the front cover with a
finger, and combined a connector.
(3) rotate the lever and it applies to a hook
firmly.
hook
label
4
33