Presentation; Ws 440 Hf - Husqvarna WS 440 HF Operator's Manual

WS 440 HF

It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator's manual as a valuable document. By following its'
content (using, service, maintenance etc) the life span and
the second-hand value of the machine can be extended. If
you ever lend or sell this machine, make sure that the
borrower or buyer gets the operator's manual, so they will
also know how to properly maintain and use it.
A purchase of one of our products gives you access to
professional help with repairs and services. If the retailer who
sells your machine is not one of our authorised dealers, ask
him for the address of your nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
8 –
English

PRESENTATION

General
• The powerful, water-cooled electric motor produces an
impressive 13 kW to the spindle, even though the saw
weighs just 25 kg (55 lbs).
• The spindle speed is electrically adjustable and can be
operated from the power unit´s remote control.
• Short distance between blade and track, for a straighter
cut.
• Slip clutch for all movable components.
• The blade direction and the direction of the water spray
can be operated from the power unit´s remote control.
• Equipped with automatic blade brake that stops the blade
within a few seconds.
Complete saw equipment consists of:
• One saw
• One track 1.2 m + saw carriage
• One track 2 m + saw carriage
• Four wall mountings
• One track holder
• One connector
• One blade guard 800 or one blade guard 1000
• One blade guard guide
• One tool kit
• One bottle of Husqvarna oil 150
• Transport cases for the different units.
• Cleaning brush
• Screws for flush cutting.
The saw carriage is mounted on both the long and short rails
at the factory to make cutting as easy as possible.
As a large part of the sawing work consists transporting, the
saw equipment is supplied in specially produced cases. The
cases provide good protection during transport and reduced
the number of packages that need to be moved between the
workplaces, which makes the work more effective.