Introduction Thank you for purchasing this Audio-Technica product. Before using the product, please read through the Quick Start Guide and Caution Guide, as well as this user manual when necessary, to ensure that you use the product correctly. Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident.
Safety precautions Cautions for rechargeable battery The product is equipped with a rechargeable battery (lithium polymer battery). • If battery fluid gets into eyes, do not rub them. Rinse thoroughly • Do not use, leave or store the battery in the following places: –...
Notes on use • Be sure to read the connected device’s user manual before use. • When you are not using the USB charging cable, disconnect it from the product. • Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the •...
Part names and functions L/R (Left/Right) indicator Housing Bushing Power supply/Control button Use to turn the power supply ON/ OFF, play/pause music and videos, or answer/end phone calls. Microphone Use this part when talking on Volume buttons the phone with Adjust the volume using this product.
Charging the battery • Fully charge the battery when using for the first time. • When the rechargeable battery is running low, the product will emit a beep through the headphones, and an indicator lamp will flash in red. When these beeps are heard, charge the battery. •...
Connecting via Bluetooth wireless technology About pairing To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired, you do not need to pair them again. However, you will need to pair again in the following cases: •...
Using the product The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices.
Using the product Listening to audio • To connect for the first time, pair the product and your device via Bluetooth wireless technology. If you have already paired the product and your Bluetooth device, turn on the Bluetooth device’s Bluetooth connection and turn on the product.
Using the product Talking on the phone • If your Bluetooth device supports telephone features, you can use the product to talk on the phone. • When your Bluetooth device receives a phone call, the product will emit a ringtone. •...
Page 11
Cleaning Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners, or other solvents for cleaning purposes. • To clean, wipe with a dry cloth. •...
Troubleshooting Problem Solution Power is not supplied. • Charge the product. Unable to pair. • Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher. • Place the product and the Bluetooth device within 1 m (3.3') of each other. •...
Indicator lamp display The indicator lamp of the product indicates the product’s status as explained below. Status Indicator lamp display pattern Blue Pairing Searching for device Waiting to be connected Flashing Connection Connecting Battery level Battery level low Blue, in the pairing or connection status, turns red. Charging Charge Fully charged...
Specifications Headphones Type Dynamic Driver 12 mm Sensitivity 108.5 dB/mW Frequency response 20 to 20,000 Hz Impedance 32 ohms Microphone Type Electret condenser Polar pattern Omnidirectional Sensitivity -42 dB (1 V/Pa, at 1 kHz) Frequency response 80 to 10,000 Hz Communication specifications Communication system Bluetooth version 4.1...
Need help?
Do you have a question about the ATH-C200BTBK and is the answer not in the manual?
Questions and answers