Advertisement
GameSir T6 Bluetooth Controller
Micro-USB charging cable
User Manual
iOS 11.0 (or higher)
Register your GameSir ID online at https://gamesir.hk/ to get real-time information on your product's warranty status and a series of exclusive benefits from GameSir.
* 12-month replacement of the same model from the date you received it.
* Contact us for free online technical support
Website: https://gamesir.hk
E-mail: cs@gamesir.hk
Hotline: +1-888-937-1733 (USA & Canada)
Service Hours: Sat.-Sun. 9:00 AM-6:00 PM PST
Mon.-Wed. 6:00 AM-6:00 PM PST
Thur.-Fri. 6:00 AM-3:00 PM PST
Step 1
Scan the QRB below, then download and install Geekgamer from App Store.
Step 2
Connect GameSir T6 to the iPhone via Bluetooth
Press and hold the button B of the controller and switch it on at the same time, the indicator light will flash in blue; turn on Bluetooth in the iPhone, then search and pair with GameSir-T6. If the connection indicator light stays blue, the pairing is completed.
Step 3
Add and edit game settings
In the power-on state, press button A+LB for 3 seconds at the same time to enter the joystick correction mode. Then the indicator light stays purple. Rotate the joystick to the outermost edge for 3-5 turns and then release it, waiting for 1-2 seconds. If the correction is successful, the purple light flashes slowly at this time, then press button A to exit the correction mode. The indicator light returns to the same state as before the joystick is corrected.
When charging in the power-on state, the indicator light flashes in red + current status light.
When the battery is full, the indicator light stays red + current status light.
When charging in the power-off state, the indicator light flashes in red, and when the battery is full, the indicator stays red.
When the power is below the battery low voltage alarm, the indicator light flashes in red quickly.
Charging time: 2 - 2.5 Hours.
The controller is in the connected state, and if without any operation over 5 minutes it will power off automatically.
The controller is not connected over 2 minutes when it is power-on, and it will automatically power off.
When the power is below the battery low voltage alarm, the controller will automatically power off.
The controller is in the connected state, if there is no operation for over 5 minutes, it will automatically sleep. In the automatic sleep, press any button of A, B, LT, LB to wake up.
We hope this manual answering any questions you may have had. If you have any further questions, please contact us:
GameSir Facebook: https://www.facebook.com/myGamesir
Twitter: https://twitter.com/mygamesir
Customer Service: cs@gamesir.hk
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the T6 that isn't answered in the manual? Leave your question here.