Rollei Desview T2 - Teleprompter Manual

Contents

• Packing list
• Structure
• Application
• APP installation
• Remote controller introduction
• After-Service
• Warranty card

Packing list

Structure

Application

Using the smartphone for live stream Share below two methods for your reference

Installation steps

Take out clamp's components

Install the clamp on the teleprompter

Tighten with the screw cap

Install the teleprompter on the tripod by 1/4" screw hole on the bottom

Inner foam ring, outer foam ring, 49mm lens adapter, paste the outer foam ring on the 49mm lens adapter, and then select the inner foam ring that matches the phone lens and embed it in the center of the outer foam ring

Install the assembled 49mm lens adapter onto the teleprompter

Install the phones in front of and rear of the teleprompter

Using DSLR for live stream

Methods 1: Tablet + DSLR

Installation steps

Take out the lens adapter

Install the lens adapter on your camera

Install the teleprompter on the camera

Put the teleprmpter's smartphone on the teleprompter

Install the whole teleprompter on the tripod

Adjust the focus of lens to full screen

APP installation

IOS app download

IOS user search"BESTVIEW."

Audroid app download

Use your scan tool scan the QC Code to download

Remote controller

Remote controller introduction

NOTICE: Doe to different brand phone, some smartphone function will be a little different after connected the remote

Remote use instruction

1. power on: Keep press , until the lights on (about 2 seconds)
2. power off: Keep press , until the lights off (about 5 seconds)
   Notice: If power on without connect anything, it will power off after 5 minutes; if connected the phone, it will power off after 30 minutes
3. Connect: After power on, LED lights on, auto into compare mode, select BESTVIEW T1 to connect. After connected, LED lights off. Next time it will connect automatically. If you want connect new device, on power off mode, keep press longer that 8 seconds, lights flicker, then into the compare mode.
   

After-Service

Conditions of Warranty Service

1. Free service for one year from the day of purchase if the issue is caused by manufacturing errors.
2. The components and maintenance service fee will be charged if the period is expired.

Free service will not be provided in the following situations (* Even if the product is still within the warranty period)

1. Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
2. Damage caused by a natural disaster, abnormal voltage, and environmental factors, etc.