Advertisement
The bike is made of marine quality AISI 316L stainless steel conforming to standard 2001/95/EC on the general
safety of products. Its anti-corrosion treatment makes it suitable for chlorinated water, seawater and thermal
waters. It does not require any special care in pH-controlled water (6.7 / 7.6).
1.
Remove the bike after every use and rinse it with soft water.
2.
Regularly check the pH of your swimming pool ( pH 7.2 advisable )
3.
Remove the bike during manual dosages of chemical products or impact treatments. Keep the bike away to
avoid any splashes that can stain or any deposits (due to the concentration of chemical products).
4.
Deposits of powder, salt, corrosive products that encourage the corrosion process.
5.
cleaning, it is advised that you remove the bike from the pool so as to avoid any risk of stains or deposits.
6.
When you are not using the bike, it must be rinsed thoroughly with soft water, then dried and stored in a location
away from chemical products, as well as equipment used for dosing chemical products for pool maintenance.
7.
If there are lime-scale deposits or stains, these can be removed with a polishing cleaner for stainless steel and
a non-abrasive soft cloth. Then wash with clean water and dry it completely.
8.
We advice you to move your bike once a week for prevent the bottom of the equipment from damage such as
abrasion and stain.
9
Advertisement
