Single Lever Switch Operation - Yamaha F400A Owner's Manual

1
2
1. Port side control lever
2. Center engine
To release
(1) Place the control lever in " " (neutral).
(2) When the "CENTER ENGINE" switch is
pressed, a beep will sound and the LED
will go off.
EMU48720

Single lever switch operation

TIP:
 When the single lever switch is activated,
the starboard control lever is inoperable.
You must start all the engines to enable the
single lever switch.
To set
(1) Place the control lever in " " (neutral).
(2) When the "SINGLE LEVER" switch is
pressed, a beep will sound and the LED
will come on.
1. "SINGLE LEVER" switch
2. LED
(3) The port side control lever will allow you
to perform shift and throttle operations
for all outboard motors that have been
started.
1
2
2
3
1. Port side control lever
2. Port side engine
3. Center engine
4. Starboard side engine
To release
(1) Place the control lever in " " (neutral).
(2) When the "SINGLE LEVER" switch is
pressed, a beep will sound and the LED
will go off.
(3) You can perform normal shift or throttle
operations.
Operation
2
1
4
4
55