Center Engine Switch; Single Lever Switch - Yamaha F400A Owner's Manual

Components
Single engine
2
1
1. "STATION" switch
2. LED
Twin engines / Triple engines
2
1
1. "STATION" switch
2. LED
EMU48543

Center engine switch

When the "CENTER ENGINE" switch is
pressed while all engines have been started,
the buzzer will sound and the LED will come
on. While the LED is lit, the port side control
lever allows you to perform shift and throttle
operations for the center engine only. For fur-
ther information, see page 54.
26
Triple engines
1. "CENTER ENGINE" switch
2. LED
EMU48550

Single lever switch

For multiple engines, when the "SINGLE LE-
VER" switch is pressed, the buzzer will
sound, the LED will come on, and the port
side control lever will allow you to perform
shift and throttle operations for all outboard
motors that have been started. For further in-
formation, see page 55.
TIP:
 When the single lever switch is activated,
the starboard control lever is inoperable.
 You must start all the engines to enable the
single lever switch.
Twin engines / Triple engines
1. "SINGLE LEVER" switch
2. LED
2
1
2
1