Box Contents; Connection Diagram; Rear Panel Overview - Alesis QX61 Quick Start Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

BOX CONTENTS

QX61
USB cable
Software DVD
Quickstart Guide
Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM

Please refer to the following scenario for connecting the
QX61.
1.
Connect a USB cable from your computer to the QX61.
The unit will be powered through the USB connection.
The first time you connect QX61 to your computer, it will
automatically install the necessary drivers. (If you use a
PC, a dialog box will appear telling you the "new
hardware" is ready to use.)
Alternatively, if you do not wish to use a computer in
your setup or if you wish to power the QX61 externally,
please plug in a 9V DC, 500mA power adapter, center-
positive, 5.5mm barrel diameter.
2.
If you would like to use an external sound module,
connect a 5-pin MIDI cable from the KEYBOARD MIDI
OUT of the QX61 to the MIDI IN of the external device.

REAR PANEL OVERVIEW

1.
DC POWER ADAPTER INPUT – Plug in a
9V DC, 500mA power adapter, center-
positive,
5.5mm
separately) if you do not wish to power the
QX61 through the USB connection.
2.
POWER SWITCH – Turns the power on/off.
If you are using a power adapter (sold
separately), set the switch to "POWER"
when turning it on. If you are powering it via its USB CONNECTION, set the switch to "USB" when turning it
on.
3.
USB PORT – Plug a standard USB cable into this outlet and into the USB port of your computer. The
computer's USB port will provide power to the QX61. This connection is used to send and receive MIDI data to
and from your computer and may also be used to send MIDI data from your computer to a device attached to
the MIDI OUT port of the QX61.
4.
KEYBOARD MIDI OUT – Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI IN of an
external device.
5.
COMPUTER MIDI OUT – Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI IN of an
external sound module.
computer (connected to the USB PORT).
6.
SUSTAIN PEDAL INPUT – Connect a 1/4" TS sustain pedal (sold separately) to this input.
barrel
diameter
(sold
An external sound module connected to this output can be controlled by your
COMPUTER
(not included)
SUSTAIN PEDAL
(not included)
5
4
6
3
POWER ADAPTER
(not included)
EXTERNAL
SOUND
MODULE
(not
included)
2
1
3

Advertisement

Table of Contents
loading

Table of Contents