Table of Contents
Advertisement
en Installation and connection
Put on the 4 cover caps.
5.
Push the 4 cover caps downwards.
6.
Note: To install the transport locks to
transport the appliance, perform
these steps again in the reverse or-
der.
4.5 Connecting the appliance
Connecting the water inlet hose
Connect the water inlet hose.
1.
14
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
Sink
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 26.
Advertisement
Table of Contents
