Table of Contents
Advertisement
mentioned above is not covered
under your warranty�
Image appears distorted� Text is fuzzy or
blurred�
• Set the PC's display resolution
to the same mode as monitor's
recommended screen native
resolution�
Green, red, blue, dark, and white dots
appears on the screen
• The remaining dots are normal
characteristic of the liquid crystal
used in today's technology, Please
refer the pixel policy for more detail�
The "power on" light is too strong and
*
is disturbing
• You can adjust "power on" light
using the power LED Setup in OSD
main Controls�
For further assistance, refer to the
Service contact information listed
in Important information manual
and contact Philips customer service
representative�
* Functionality different according to
display�
9�2 General FAQs
Q1:
When I install my monitor what
should I do if the screen shows
'Cannot display this video mode'?
Ans�: Recommended resolution for this
monitor: 2560 x 1440�
• Unplug all cables, then connect your
PC to the monitor that you used
previously�
• In the Windows Start Menu, select
Settings/Control Panel� In the
Control Panel Window, select the
Display icon� Inside the Display
Control Panel, select the 'Settings'
tab� Under the setting tab, in box
labelled 'desktop area', move the
sidebar to 2560 x 1440 pixels�
• Open 'Advanced Properties' and set
the Refresh Rate to 60 Hz, then click
OK�
• Restart your computer and repeat
step 2 and 3 to verify that your PC is
set at 2560 x 1440�
• Shut down your computer,
disconnect your old monitor and
reconnect your Philips LCD monitor�
• Turn on your monitor and then turn
on your PC�
Q2:
What is the recommended refresh
rate for LCD monitor?
Ans�: Recommended refresh rate in
LCD monitors is 60 Hz, In case of
any disturbance on screen, you
can set it up to 75 Hz to see if that
removes the disturbance�
26
Advertisement
Table of Contents
