Using Teletext; Selecting Decoding Page Language; Digital Teletext Language; Using Instant Power On - TCL 43P615 Operation Manual

1. Press on the remote control, select Channel >
Subtitle > Subtitle type and press
2.
the hearing-impaired subtitles with your selected
language.
3. Press to close the menu.

Using Teletext

Selecting Decoding Page Language

1. Press on the remote control, select Channel >
Teletext > Decoding page language and press
to enter.
2. Press to select a proper type of language in
/
which Teletext will display and press OK
3. Press to close the menu.

Digital Teletext Language

On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
allows you to select an available language as primary
pages.
1. Press on the remote control, select Channel >
Teletext > Digital teletext language and press
to enter.
2. Press to select a language and press OK to
/
3. Press to close the menu.

Using Instant Power On

It enables you to turn on your TV faster from standby
increase standby power consumption.
1. Press on the remote control to display the
homepage, Press
Device Preferences > Power > Instant power on
and press OK to toggle between on and off.
2. Press to return to the homepage.

Network Wake Up

This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective wireless home
network;
2. The desired controller, such as a smartphone, is
connected to the same network as your TV;
3. An app which supports network waking up function,
to enter.
OK to
Hearing impaired to display
to select (Settings) >
Using More of Your TV
such as YouTube, has been installed into the
controller;
4. Networked standby is set to On in the Network
& Internet menu under homepage by pressing
(Settings) > Network & Internet and use
>
to select Networked standby and press OK to
activate.
When the TV is in networked standby mode, you can
use the app to wake up the TV remotely.
Notes:
- This feature is disabled if you press and hold the
shut the TV down
- Before using the feature of network wake up, make
sure > (Settings) > Device Preferences >
Power > Instant power on is set to on.

T-Link

Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.

Enabling or Disabling T-Link

1. Press on the remote control, select System >
T-Link and press OK/► to enter.
2. Select the T-Link option, and press OK to toggle
between on or off.
3. Press to close the menu.

Using Auto Power On

Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device's
remote. Press OK to enable this function.

Using Auto Standby

Enables all CEC devices to automatically go to the
remote. Press OK to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some devices
may not interoperate correctly when connected to
this TV. The user manual or the manufacturer of
the problematic devices should be consulted for
further information.

Using EPG (Electronic Program Guide)

EPG is an on-screen guide that displays scheduled
digital TV programs. You can navigate, select and view
programs.
1. Press on the remote control, select Channel >
EPG and press
OK
10
to enter, the Programme Guide