Advertisement
In case of mounting to wall box
3
In case of mounting to wall box, cut the plastic stud in the accessory to a suitable length
for filling the gap between the rear cover and the wall box.
Then use the M4 screws in the accessory to fix the rear cover to the wall box through
the plastic stud.
Connecting cable
Rear cover
Screws M4×25
In case of mounting to wall directly
In case of mounting to wall directly, cut and remove the side wall of rear cover which pass
the cable wire. Connecting cable wire is passed through this groove on rear cover.
Then use M3.8 wood screw in the accessory to fix the rear cover to the wall so as to
take care not to pinch among wall and rear cover.
Connecting cable
Rear cover
Wood screws M3.8×16
Rear side of rear cover
Cut and remove the side wall
of rear cover which pass the wire
13-EN
Plastic stud
Connecting cable wire is passed
through this groove on rear cover
so as not to pinch among wall and rear cover.
It is recommended that fix cable wire with tape etc..
Wall
Wall box (Procured locally)
This "Approx. 80 mm" is requirement length
for Servicing.
Please loosen the surplus cable at out of rear cover.
Wall
This "Approx. 80 mm" is requirement length
for Servicing.
Please loosen the surplus cable at out of rear cover.
13
Advertisement
