Advertisement
ELECTRICAL CONNECTIONS:
•
Locate the GND (BLACK) wire and
connect it to the chassis of the
vehicle or the negative side of the
12 V DC power supply, if installed
in other than a vehicle. You may
use an AC adapter (preferably
regulated) , with the following
capacity;12 V @ 300 ma.
•
Locate the B+ (RED) wire
connection and connect it to an
established + 12V DC source.
•
Connect the Left RCA jack to the
Left signal source and the Right
RCA jack to the Right signal
source.
•
Install the control-box(es) in a
location which allows for easy
access,
troubleshooting is necessary. Do
not situate the box in areas of the
vehicle where temperatures will
exceed 50 deg. C./122 deg. F..
•
Please make sure that neither
the main input wire harness nor
the individual feed-lines are
stressed; as this may result in
premature cable breakage and
overall failure.
•
Please make sure that a "snap"
sensation is realized when
inserting the connectors; this
ensures proper connection
between cable and control-box.
in
the
event
12V DC POWER SUPPLU
that
-
+
L
R
Advertisement
