Download Print this page

Power Acoustik METER 4 Installation page 2

Power acoustik meter 4 car-meter: install guide

Advertisement

INSTALLATION & CONNECTIONS:
Before you begin, please take the time to read completely and understand all you
need to know in order to get the best performance out of your equipment.
First; understand what type of visual information the M-4 system provides.
Secondly, decide whether you want to install the system in cluster form (all meters
together) or in individual mounting brackets at various locations around your
vehicle. Assuming you have decided on the separate / individual mounting system,
where each meter is situated in various locations, the next steps are (a) locate &
identify each of the meters and each of the 4 separate / independent line-feeds –
one for each meter. Make sure to connect the correct feed-line to the appropriate
meter. (b) open the DIN chasis and carefully remove the larger control box; the box
would now be installed in the location of your choice. After you've done that, make
electrical connections as per the instructions below in "ELECTRICAL
CONNCETIONS" section.
a) ISO DIN mounting: This type of installation is
exactly like installing a car stereo; make sure there's
adequate space inside the dash cavity and avoid
severely disrupting existing wiring and connections
for
other existing equipment. Make electrical
connections
as
CONNECTIONS" section, while making sure that the
external data cable/wire and control box are securely
tucked–away.
Run a system-test before nalizing the install.
b) " L"–bracket / under dash mounting: This type of
installation requires that you secure the L-bracket's
mounting- ange to the under side of the dash or lip.
Do this with the self-tapping screws provided and
make sure that this action would not puncture or
disrupt existing wiring.
c) "A"–pillar mounting: This type of installation
requires that you secure the brackets to the A-pillar,
using the self-tapping screws provided. Please make
an extra e ort to make sure that existing wires inside
the pillars would not be punctured or otherwise
a ected by attaching the brackets.
per
below
in
"ELECTRICAL

Advertisement

loading