Thank you very much for buying this SHARP product. Before using your SHARP Household use only refrigerator, please read this operation manual to ensure that you gain the maximum bene t from it. Climate Acceptable range of • This refrigerator is intended for making ice cubes, refrigerating and freezing food.
Page 4
Do not touch the compressor unit or its peripheral plug immediately. Then ask a service agent approved parts, as they become extremely hot during operation by SHARP for service. and the metal edges may cause injury. In case of gas leak, ventilate the area by opening Do not touch foods or metal containers in the freezer window.
Installation Free standing type Keep adequate ventilation space around the When right and left doors are not properly aligned, refrigerator. adjust using the adjustable feet. 90mm • The picture shows or more When the left door When the right door the minimum is raised.
Description 15. Fruit and vegetable crisper This case works for storing food with highmoisture freshly. Move the partition to fit the size of food. Partition (*2) 23 (*1) Fruit and vegetable crisper 16. Fresh case 17. Metal tray (Extra cool plus case) 18.
Useful modes As for the operations, refer to chapter “Control panel”. Extra cool Fresh case Express freezing Freezer Express cool compartment Extra cool Express freezing Express cool Feature This mode is to cool This mode speeds up This mode is to cool beverages or foods quickly. beverages or foods to the time to freeze food ice-cold.
Page 8
Deep freezing • This temperature setting is to keep food at deep freezing temperature. Set temperature setting to -24°C. You can also use “Deep freezing” button as a shortcut. Refer to page of “Control panel”. • The temperature may vary depending on the usage (i.e. ambient temperature, frequency of door openings, amount of food).
Control panel (SJ-F821VG, SJ-F921VG, SJ-F922VG, SJ-VX57PG) Controlling temperature Note Icon Meaning Default setting • When you press one of the keys, all icons ash once and show the standby display. Refrigerator 3°C compartment • Mode icons or indicators in operation light up on the standby display.
Page 10
Controlling temperature The refrigerator controls its temperature automatically. However, you can adjust the temperature as below. How to check the current temperature setting • When touch key, the icons change in the order shown as below. Standby display Select icon. •...
Control panel (SJ-F821VM, SJ-F921VM, SJ-VX57ES, SJ-FTF525BVP) Useful modes Door Alarm • When the refrigerator door is Button Meaning Default setting left open for over 1 minute, door Extra cool alarm sounds once, and again after 1 minute. Extra cool plus •...
Page 12
Controlling temperature The refrigerator controls its temperature automatically. However, you can adjust the temperature as below. How to check the current temperature setting The indicator lights up to show the current temperature level by pressing button shown below. “Refrigerator compartment” button “Freezer compartment”...
Storing food • Ensure that the food is of the freshest possible quality to maximize the storage life of perishable food. The following is a general guide to help promote longer food storage. • Food has a limited storage life. Make sure not to exceed use-by date indicated by manufacturer. Freezer Advice for preventing dew or frost inside the refrigerator...
<SJ-F821VM, SJ-F921VM, SJ-VX57ES, SJ-FTF525BVP > Note Contact the service agent approved by SHARP to • After cleaning, make sure to put the shelves and the replace the light. The light is not to be replaced other cases on original position.
Before you call for service Before calling for service, check the following points. Problem Solution The refrigerator SJ-F821VG, The refrigerator is set at “storefront display mode”. does not cool at all SJ-F921VG, Follow the steps 1 to 2 to cancel this mode. Beep beep beep and the icons light SJ-F922VG,...
Page 16
Press “Refrigerator compartment” button and “Freezer compartment” button simultaneously and continuously for 3 seconds or more. • The door alarm will sound again after approximately 2 days. If you still require service Refer to your nearest service agent approved by SHARP.