Table Of Contents - Panasonic DMC-TZ4P Service Manual

TABLE OF CONTENTS

1 Safety Precaution -------------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1)---------3
1.4. How to Discharge the Capacitor on Flash
PCB------------------------------------------------------------4
2 Warning --------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatic Sensitive (ES) Devices ---------------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord (For EB/GC/SG) ----------------6
2.4. How to Replace the Lithium Battery-------------------7
3 Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) -----------------------------------------8
3.4. How to Define the Model Suffix (NTSC or PAL
model) --------------------------------------------------------9
4 Specifications ---------------------------------------------------- 12
5 Location of Controls and Components------------------ 14
6 Service Mode ----------------------------------------------------- 16
6.1. Error Code Memory Function ------------------------- 16
7 Service Fixture & Tools --------------------------------------- 19
7.1. Service Fixture and Tools ------------------------------ 19
7.2. When Replacing the Main PCB ---------------------- 19
7.3. Service Position ------------------------------------------ 19
8 Disassembly and Assembly Instructions --------------- 21
8.1. Disassembly Flow Chart-------------------------------- 21
8.2. PCB Location---------------------------------------------- 21
8.3. Disassembly Procedure -------------------------------- 22
8.4. Disassembly Procedure for the Lens --------------- 27
8.5. Assembly Procedure for Lens ------------------------ 30
8.6. Removal of the CCD Unit ------------------------------ 34
8.7. Removal of the Zoom Motor Unit -------------------- 35
8.8. Removal of the Focus Motor Unit -------------------- 35
8.9. The Applyment of Grease Method------------------- 36
9 Measurements and Adjustments -------------------------- 37
9.1. Matrix Chart for Replaced Part and Necessary
Adjustment ------------------------------------------------- 37
10 Maintenace -------------------------------------------------------- 38
10.1. Cleaning Lens, Viewfinder and LCD Panel -------- 38
PAGE
2
PAGE