Table of Contents
Advertisement
ATTACHMENTS
This unit can use many different attachments. See the attachment
page in this book. This unit can pull attachments like a lawn
sweeper, a lawn aerator, a hopper spreader or a small trailer.
For all pull–behind attachments or trailers, the maximum gross
weight is 300 pounds. Gross weight is the weight of the attachment
or trailer and any load that might be on or in it.
Do not operate on a slope that is greater than 10 degrees when
using a pull–behind attachment or trailer. We have included a slope
guide in this book to help you determine the slope on which you will
be operating your unit. Never allow someone to stand or ride on or
in an attachment or trailer.
HOW TO USE THE THROTTLE CONTROL
Use the throttle control to increase or decrease the speed of the
engine.
1.
The FAST position is marked with a detent. For normal opera-
tion and when using a grass bagger, move the throttle control
to the FAST position. For maximum charging of the battery and
for a cooler running engine, operate the engine in the FAST
position.
2.
The engine governor is set at the factory for maximum perform-
ance. Do not adjust the governor to increase the speed of the
engine.
HOW TO USE THE BLADE ROTATION CONTROL
Use the blade rotation control to engage the blade(s) (Figure 8).
1.
Before you start the engine, make sure the blade rotation con-
trol is in the DISENGAGE position.
HOW TO USE THE SHIFT LEVER
To change the forward speed or the direction of the unit, follow the
steps below.
CAUTION: Before you move the shift lever, completely push
the clutch/brake pedal forward to stop the unit. If the unit is not
stopped, the gearbox can be damaged.
1.
Completely push the clutch/brake pedal forward to stop the
unit. Keep your foot on the pedal.
2.
Move the throttle control lever to the SLOW position.
3.
To go forward, move the shift lever to a forward speed setting.
To go backward, move the shift lever to reverse.
4.
Slowly release the clutch/brake pedal. Do not keep your foot on
the pedal.
5.
Move the throttle control to the FAST position.
F–040741L
OPERATION
Disengage
Position
2.
Move the blade rotation control to the ENGAGE position to
rotate the blade(s).
NOTE: If the engine stops when you engage the blade(s),
the seat switch is not activated. Make sure you sit in the
middle of the seat.
3.
Move the blade rotation control to the DISENGAGE position
to stop the blade(s). Before you leave the operator's position,
make sure the blade(s) has stopped rotating.
4.
Before you ride the unit across a sidewalk or a road, move the
blade rotation control to the DISENGAGE position.
WARNING: Always keep your hands and feet away
from the blade, deflector opening, and the mower
housing when the engine runs.
Trimming
Snow Thrower
Bagging Grass
Mulching Grass
Normal Mowing
Easy Mowing
Snow Blade
Transport
Attachments
* See the Instruction Book for the Attachment.
16
FUNCTION
SHIFT LEVER
5 Speeds
1
1 or 2
1 or 2
2 or 3
3 or 4
5
*
Blade Rotation Control
Engage Position
Figure 8
THROTTLE
FAST
FAST
CHOKE
FAST
SLOW
THROTTLE
Advertisement
Table of Contents
