Table of Contents
Advertisement
HOW TO INSTALL THE MOWER HOUSING
Use the fasteners shown below to install the mower housing. The
fasteners are shown at full size.
(A)
31x4
1.
Move the blade rotation con-
trol to the DISENGAGE posi-
tion (Figure 5).
2.
Move the lift lever to the level
adjustment position (Figure 4).
WARNING: The lift lever
is spring loaded. Make
sure the lift lever is locked
in the LEVEL ADJUST-
MENT position.
3.
Push the mower housing under
the right side of the unit.
A
Lift Link
B
Blade Rotation
B
Lift Link
Suspension Arm
A
B
F–040741L
(B)
17x91
Level Adjustment
Position
Lift Lever
Control
A
ASSEMBLY
4.
For shipping purposes, the back of the front hanger is secured
with a plastic tie. Cut the plastic tie.
5.
Attach the front hanger to the mower housing with the hanger
rod. Fasten with the fasteners as shown. See illustration "F".
6.
Put the mower drive belt around the stack pulley. See Illustra-
tion "G" Figure 5. Make sure the "V" side of the mower drive
belt is against the stack pulley. Also, make sure the mower
drive belt is not twisted.
7.
Make sure the mower drive belt is between the stack pulley
and the two belt guides. See illustration "G".
8.
Attach the lift links to the lifter assembly. Fasten with the
washers (B) and hair pins (A). See illustrations "A" and "B".
9.
Attach the right and the left suspension arms to the suspen-
sion brackets. Fasten with the washers (B) and hair pins (A).
See illustrations "C" and "D".
10. Attach the extension spring to the blade control rod. Make
sure to attach in the top hole. See illustration "E".
11. Move the blade rotation control to the ENGAGE position.
Make sure the mower drive belt is inside all the belt guides.
12. Make sure the mower housing is level. See the instructions on
"How To Level The Mower Housing".
Figure 4
13. Check the operation of the blade rotation control. See the in-
structions on "How To Adjust The Blade Rotation Control".
Lifter
Assembly
Hanger Rod
12
Stack Pulley
Belt
Guide
Mower Drive Belt
Extension
Spring
Mower
Drive Belt
Front Hanger
Belt
Guide
Suspension
Arm
A
B
Blade
Control Rod
Figure 5
Advertisement
Table of Contents
