Toshiba W-528 Service Manual page 37

1-2-19 Lever Unit Pinch Ass'y, Plate Joint,
Spring Pinch Drive Removal
1) Lift the Unit Pinch Ass'y Œ.
2) Remove the Plate Joint ´ from Lever Pinch Drive.
3) Remove the Spring Pinch Drive ˇ.
Note :
1) Take extreme care not to touch the grease on the
Roller Pinch.
2) When reinstalling, be sure to apply grease on the
post pinch roller.
´ PLATE JOINT
ˇ SPRING PINCH DRIVE
Fig. 4-29 Lever Unit Pinch Ass'y, Plate Joint,
Spring Pinch Drive Removal
Toshiba
ΠLEVER UNIT PINCH ASS`Y
1-2-20 Lever #9 Guide Ass'y Removal
1) Remove the Spring #9 Guide Œ.
2) Lift the Spring #9 Guide Ass'y ´ in the direction
of arrow "A".
Note :
1) Take extreme care not to get grease on the tape
Guide Post.
2) After reinstalling, check the bottom side of the Post
#9 Guide to the top side of Main Base.
ΠSPRING #9 GUIDE
Fig. 4-30 Lever #9 Guide Ass'y Removal
Disassembly and Reassembly
"A"
´ LEVER #9 GUIDE ASS`Y
"B"
4-15