Table of Contents
Advertisement
CHARGING BY SOLAR PANEL
The portable power supply is equipped with a so-called Anderson socket, which can be used
to connect a solar panel*.
WARNING!
To charge the battery in the portable power supply, only use solar panels that have
a compatible Anderson connector.
1. Place the solar panel in such a way that it receives as much direct sunlight as possible.
2. Insert the Anderson plug on the solar module into the Anderson socket (11) on the portable
power supply to charge the built-in battery.
NOTE:
The battery in the portable power supply is fully charged when the battery indicator on
the display shows full charge.
3. Disconnect the solar panel from the portable power supply as soon as charging is complete.
CHARGING VIA USB-C (in/out)
The battery in the portable power supply can be charged via the left-hand USB-C socket (7,
in/out). To do this, connect an appropriate external device* using a suitable USB-C cable*.
WARNING:
Never charge the battery in the portable power supply via the right-hand USB-C
socket (7, out)! This can cause a short circuit, which can lead to irreparable damage
to both devices.
CHARGING VIA THE CIGARETTE LIGHTER CABLE
1. Insert the plug on the supplied cigarette lighter cable (fig. 1, E) into the DC7.9 socket (19).
2. Insert the cigarette lighter plug into the appropriate socket on your car to charge the
battery of the portable power supply.
NOTE:
The device is fully charged when the battery indicator on the display shows full charge.
3. Once charging is complete, disconnect the cigarette lighter cable from the portable power
supply.
NOTE:
The output voltage of the 12V vehicle socket may vary, and therefore the charging
speed and time will depend on the vehicle type and vehicle status.
IMPORTANT:
To prevent a failure of the car battery, it is only possible to charge the portable
power supply via your car's cigarette lighter when the engine is running.
CLEANING
Before cleaning, switch off the device and disconnect it from any possible power sources
(unplug charging devices)!
Clean the outside of the device with a dry cloth. Do not use cleaning fluid, as this may damage
the electronic components.
Protect the device from dust and moisture! Store the device in its box when you do not plan
to use it for an extended period of time.
Check the charge status if the device has not been used for a long time.
8
*not included
Advertisement
Table of Contents
