Table of Contents
Advertisement
WARNING:
Never charge the battery in the portable power supply via the right-hand USB-C
socket (7, out)! This can cause a short circuit, which can lead to irreparable damage
to both devices.
POWER SUPPLY VIA WIRELESS CHARGING ZONE
The 15W wireless charging zone (18) can be used to charge a compatible end device* (e.g.
latest smartphone).
1. Place the back of the desired device (without a protective case) on the wireless charging
zone (18). The charging process will start automatically.
USING ADAPTERS
ADAPTER FOR CIGARETTE LIGHTER
The portable supply comes with two 5.5/2.1mm adapters for a cigarette lighter (fig. 1,
G). These adapters can be used to connect cables with a cigarette lighter plug to the DC
5.5/2.1mm sockets (12).
1. Insert the plug on the adapter (fig. 1, G) into one of the DC 5.5/2.1mm sockets (12).
2. Insert the cigarette lighter plug on a corresponding cable* into the adapter socket.
ADAPTER FOR UK PLUGS
The portable power supply comes with two UK plug adapters (fig. 1, F). These adapters can
be used to connect cables with a UK plug to the 230V AC sockets (14).
1. Insert the UK plug adapter (fig. 1, F) into one of the 230V AC sockets (14).
2. The UK plug adapter can then be used to connect devices that only have a UK plug.
LED LIGHT
This device is equipped on two sides with particularly bright LED panel lights (19).
1. Press the light switch (5) for approximately 5 seconds to turn on the light.
2. Press the light switch (5) repeatedly to switch between the different modes (dim/bright/
flashing).
WARNING!
Do not shine the light directly into people's eyes, as it may cause eye damage.
CHARGING THE BUILT-IN BATTERY
CHARGING WITH POWER ADAPTER
1. Connect the supplied 15V/2A power adapter (Fig. 1, B) to the Euro mains cable (fig. 1, C).
2. Insert the plug on the power adapter into the DC 7.9V socket (19).
3. Plug the Euro plug on the mains cable into a mains socket to charge the built-in battery of
the portable power supply.
NOTE:
The battery in the portable power supply is fully charged when the battery indicator on
the colour display shows full charge.
The USB-A, QC3 (8), DC5.5/2.1 (12) and 12V cigarette lighter (4) outputs switch off when
the portable power supply is charged via the DC7.9 socket (10).
4. Once the battery has finished charging, disconnect the portable power supply from the
mains and unplug the power adapter.
*not included
7
Advertisement
Table of Contents
