Servicing ..................2 Error indication ................18 Product service centres .............2 SPECIFICATIONS ................19 FCC Notice .................3 BluOS ..................19 WELCOME TO THE WORLD OF CYRUS ........4 Analogue output ..............19 Preparations for Installation ............4 Power Supply ................19 INSTALLATION ................5 Power Consumption ..............19 Key to the rear panel drawing ...........5 Enclosure .................19...
Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Cyrus Stream-XR User Instructions...
Product service centres For product service or technical advice, contact only authorised Cyrus service centres. Contact details for Cyrus distributors may be found on the Cyrus website at www.cyrusaudio.com. Cyrus Stream-XR User Instructions...
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Cyrus Stream-XR User Instructions...
• Ethernet cable and respected manufacturers of hi-fi equipment. • 2 x Phono leads for MC-BUS connection Now is a good time to register your new Cyrus product. • Quick-Start guide To register, click here or visit - After removing these items, please retain the packaging.
This feature is usable if you own a Cyrus amplifier. Refer from the mains supply before connecting or to the relevant product handbook for MC-BUS wiring disconnecting audio interconnects.
• Tap Vol + or Vol - to set the volume in 1dB steps. after music last played. If required, the auto-standby The volume level is shown numerically in dB at the right feature may be disabled in the setup menu. side of the display. Cyrus Stream-XR User Instructions...
Selecting presets The Stream-XR allows for quick selection of 2 presets via the front panel. These presets can be internet radio stations, playlists or albums and can be set up within the BluOS app. Cyrus Stream-XR User Instructions...
Remote control operation Sending commands to Cyrus components Remote control introduction • Press the CYRUS The iR14 remote control will send commands to Cyrus key to switch on amplifiers, CD players and audio streamers*. a Cyrus amplifier. CONTROL The remote control can also be programmed with the The remote commands from two other remote control handsets.
Cyrus amplifier commands • Press the CYRUS key to set the remote control to Cyrus amplifier mode. You can now control a Cyrus amplifier. The CYRUS key will flash red when commands are being sent in Amplifier mode. NOTE: Commands marked * are for Cyrus XR series...
• Press the key to set the remote control to CD mode. The key will light red. You can now control both a Cyrus CD player and amplifier. The key will flash red when commands are being sent in CD mode.
• Press the key to set the remote control to audio streamer mode. The key will light red. You can now control both a Cyrus audio streamer and amplifier or an audio streamer that includes an amplifier. The key will flash red when commands are being sent in audio streamer mode.
CONTROL This page lists commands that will control the Phono Signature. SOURCE • Press the CYRUS key to set the remote control to Cyrus mode. Display off You can now control both a Cyrus amplifier and the Phono Signature. The CYRUS key will flash red when commands are being sent in this mode.
‘CONTROL’ and ‘SOURCE’ and the ‘SETUP’ 6. Release the key on the reference remote control. key. 7. Press a key on the Cyrus remote control (volume up Preparation for learning in this example) to select where you want to save that...
TV or Satellite receiver etc. • Press the ‘TV’ or ‘SAT’ key to select the mode you want. • Press the command key. The mode key will flash red when sending a programmed command. Cyrus Stream-XR User Instructions...
Sets the colour of the standby indicator. automatically to reduce energy consumption Choose from XR (white), Green or Classic If required, Auto Standby may be disabled by (to match other Cyrus units). Factory selecting this function. default setting is XR. Standby Type...
New firmware versions will be available via OTA (Over The Air) and from the ‘Support’ pages of the Cyrus website www.cyrusaudio.com. If new firmware is available, this will be packaged with other documents including - •...
Press play on the Stream- If a fault condition still remains, return the streamer to to network interruption or XR or from within the your Cyrus appointed retailer or an authorised Service external interference. BluOS app to continue Centre. playback.
Material ............Die cast chassis Warranty claims must wherever possible be made through the retailer from whom the equipment was purchased. Cyrus reserves the right to change all specifications without notice. E &OE This warranty excludes: Acknowledgements • Damage caused through neglect, accident, misuse, This product uses the LVGL graphics library.
Page 22
Cyrus Audio Ltd., Ermine Business Park, Huntingdon, PE29 6XY, U.K. Issue 1.0...