IMPORTANT! READ BEFORE OPERATING THIS EQUIPMENT! ...1 FIRMWARE ..................7 Power supply ................2 Checking the version from the PSU-XR ........7 Servicing ..................2 Checking the version from a connected Cyrus product .....7 Product service centres .............2 Updating the firmware ..............7 FCC Notice .................3 TROUBLESHOOTING GUIDE ............8 WELCOME TO THE WORLD OF CYRUS ........4...
Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Cyrus PSU-XR User Instructions...
Refer all servicing to qualified service The mains supply requirement of your PSU-XR is marked personnel. on a label on the rear panel. Before connecting, check that this voltage is the same as your mains supply.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. *115V products Cyrus PSU-XR User Instructions...
• 1 x Firmware update cable and respected manufacturers of hi-fi equipment. • Quick-Start guide Now is a good time to register your new Cyrus product. To After removing these items, please retain the packaging. register, click here or visit - www.cyrusaudio.com/support/warranties.
Important – read before making any connections Connecting to the AC mains supply NOTE: When a PSU-XR is in use, both the PSU-XR and the To avoid possible damage to your audio system, it partnering Cyrus product will require connection to the is essential to disconnect all system components mains supply.
Auto Standby There is no energy saving auto-standby setting for the PSU-XR as it will always set to the same power state as the Cyrus product it is connected to. If auto-standby is required it can be enabled at the connected product.
Firmware From time to time there may be a requirement to check the firmware version installed in the PSU-XR. This may be necessary to ensure compatibility with connected Cyrus products or to assist with technical or service questions. Checking the version from the PSU-XR...
If the blue indicator persists, return the PSU-XR to your Cyrus retailer to arrange for service/repair. If a fault condition still remains, return the PSU-XR to your Cyrus appointed retailer or an authorised Service Centre. Cyrus PSU-XR User Instructions...
Equipment for attention under warranty should be consigned return carriage paid. If returned equipment is found to comply with the published specification, CYRUS reserves the right to raise a charge. The above conditions do not affect your statutory rights as a consumer.
Page 12
Cyrus Audio Ltd., Ermine Business Park, Huntingdon, PE29 6XY, U.K.
Need help?
Do you have a question about the PSU-XR and is the answer not in the manual?
Questions and answers