Machine Maintenance - Tennant Nobles ASC-15 Operator's Manual

WARNING: Fire Or Explosion Hazard. Never
Use Flammable Liquids Or Operate Machine In Or
Near Flammable Liquids, Vapors Or Combustible
Dusts.
2. Use the equipped vacuum and solution hoses and
connect them to floor tool and then to front of
machine (Figure 32).
FIG. 32
3. Turn the FORMULA ON/OFF lever to the OFF
position, located at front of machine (Figure 33).
FIG. 33
4. Activate pump switch and press vacuum/blower
switch towards vacuum symbol (Figure 34).
FIG. 34
ASC- -15 / ASC- -57 (04- -10)
Home Find... Go To..
5. Operate floor tool as normal (Figure 35).
WARNING: Fire Or Explosion Hazard. Do Not
Pick Up Flammable Materials Or Reactive Metals.
FIG. 35
6. After cleaning, relieve water pressure from tool
before disconnecting hose. Squeeze trigger for
five seconds after turning switches off.
7. Perform recommended maintenance procedures
(See MACHINE MAINTENANCE).

MACHINE MAINTENANCE

To keep machine in good working condition, follow
machine's daily, monthly and quarterly maintenance
procedures.
WARNING: Electrical Hazard. Unplug Power
Cord Before Servicing Machine.
ATTENTION: Machine repairs must be performed
by authorized personnel only.
HOUR METER
Each machine is equipped with an hour meter to
record total hours of pump use. Use meter to
determine when to perform recommended
maintenance procedures and to record service history
(Figure 36).
FIG. 36
OPERATION
EN
15