PARTS LIST PART ITEM DESCRIPTION DIMENSION (INCH) IMAGE QTY. Frame 4 x 40 Bracket 8 x 4 Bracket 8 x 1 Bracket 8 x 1 Rafter Sealing Strip Trim to 44 PCE1 Roof Panel 4 x 41 PCC2 Roof Panel 4 x 40 Roof Strip Roof Tie...
Page 4
Step 1 Assemble S1 frames to make up the main structure using CB1 brackets for the corners and JF1 brackets for straight joints. Also use CB1 and JF1 brackets to secure the ST3 tie bar. Please note 2'' Tec Screws are for roof panels only (UNDERNEATH) DETAIL X...
Page 5
Step 2 Move the Shelter to its final position and attach all FT1 foot brackets. ttach R1 roof rafters using RB1 brackets. Then a 2 " 2 " 2 " 2 "...
Page 6
Step 3 Apply sealing strips (SS) to the top of the rafters then arange the roof panels by lining up the end panels(PCE1) flush with the rafters and leaving a gap between the middle pieces(PCC2). PCE1 PCC2 PCC2 PCE1...
Page 7
Step 4 Secure the roof panels in place using RC1 strips. Then apply the 2MD edge trim fit the Black plastic caps on along the bottom edges of the roof. Push exposed nuts and bolts. And use a mallet to fit the square plastic end caps to any open ends of box sections.
Page 8
Ground anchor positions and overall size Suggested size for concrete base: 8 inch oversize all the way round. Scale 1:20 37" 2 "...
Touch up any exposed metal should it get scratched CONTACT DETAILS: Email : Sales@nobutts.com Web : www.nobutts.com Tel : 1-888-662-8887 No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443 All Parts and Fixing checked by: Print Name: Signature...