PARTS LIST ITEM PART DESCRIPTION DIMENSIONS IMAGE QTY. Frame 4 x 40 Frame 4 x 20 Post Roof Tie Bracket 3 x 4 Bracket 3 x 1 Bracket 3 x 1 Rafter Sealing Strip Trim to 87 PCE2 Roof Panel 8 x 41 PCC2 Roof Panel...
Page 4
Step 1 Assemble S1 frames to make up the main structure using CB1 brackets for the Corners and JF1 brackets for the straight joints. Please note 2'' Tec Screws are for roof panels only MEASURE THE WIDTH AND DEPTH OF THE SHELTER TO CHECK CORRECT ALIGNMENT.
Page 5
Step 2 Attach P1 post using a JF1 bracket then use two JF1 brackets to attach S3 frame. The ST5 tie bar is mounted using a CB1 and a JF1 bracket. Make sure the structure is square then move the shelter to its final location before using the FT1 foot brackets to secure it to the ground.
Page 6
Step 3 Attach R2 rafters using RB2 brackets. 1035 1035 ENSURE CORRECT ALIGNMENT OF RAFTERS SIDE VIEW...
Page 7
Step 4 Stick sealing strips (SS) to the rafters. Align the PCE2 roof panels with the outer roof rafters and equaly space the PCC2 panel in the middle. PCE2 PCC2 PCE2 SS SS SS SS SS SS SS SS...
Page 8
Step 5 Screw down the RC2 strips as shown below. Then apply the 2MD edge trim to the bottom edges of the roof panels.
Page 9
PLAN VIEW OVERALL DIMENSIONS AND GROUND FIXING POSITIONS 1035 1035 2209...
Touch up any exposed metal should it get scratched CONTACT DETAILS: Email : Sales@nobutts.com Web : www.nobutts.com Tel : 1-888-662-8887 No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443 All Parts and Fixings checked by: Print Name: Signature:...