– Servicing FIVE YEAR WARRANTY • Environmental Potentials will replace or repair any product from the EP-2050 product line as long as it was not damaged during installation or damaged from faulty installation. • EP warranty registration card must be filled out and received by Environmental Potentials within 15 days of installation.
The available configurations are Single leg (1 hot, 1 neutral and 1 ground) or Single Phase (2 hot, 1 neutral and 1 ground). Make sure your EP product is suitable for your application. Note: Call EP to confirm the product application. EP-2050 Series INSTALLATION GUIDE...
Page 4
NOT be connected to neutral bus bar. Circuit Breaker Recommendation EP-2050 series requires a 15A breaker. If the installation area is highly prone to lightning strikes and surges, EP recommends a higher rated breaker up to 30A. Note that the filter performance is not altered by the type of fuse the customer selected.
Ensure you have considered all of these options before mounting. attempting internal installation. WARNING • ALWAYS have a professional electrician with proper safety equipment perform installation. • Any attempt to open unit voids warranty. EP-2050 Series INSTALLATION GUIDE...
If the EP unit does malfunction, have a professional electrician inspect the wire connections. If the problem persists, contact your EP sales representative to discuss obtaining a replacement unit. EP-2050 Series INSTALLATION GUIDE...
Need help?
Do you have a question about the EP-2050 Series and is the answer not in the manual?
Questions and answers