LG 14U70R Series Owner's Manual page 6

5 Pre-Tech Support Checklist
Symptom
The screen color • Check if Reader Mode is on.
does not display When the Reader mode is on, turn the setting off.
properly.
- Press the Start button [
> [LG Smart Assistant] > [Display Setting] >
[Reader Mode] settings off.
• Using the Reader mode and the Night mode at
the same time can cause color distortion. Turn the
Reader mode settings off or change the Night mode
to [Off].
- Turning off Night light: Press the Start button
[ ] and select Settings [
[Display] > [Night light] > [Off].
• If the screen still does not properly display, contact
the LG Electronics service center.
- Reader mode controls the brightness and color
of the LCD screen to look like printed paper and
protect the user from eyestrain.
The power does not • Check if the power cord is connected.
turn on.
• After disconnecting the power cord and reconnecting
it, press the power button of the product.
• If the power is not on after reconnecting the power
cord, remove the adapter and hold the power button
for at least 6 seconds to reset the system. Once the
system is reset, press the power button again to
turn on the computer.
The system stops • Remove the adapter and press the power button for
during use or does approximately 6 seconds to reset the system. Once
not properly turn the system is reset, press the power button again to
off. turn on the computer.
- Caution: Unsaved data may be lost. Pressing the
power button while the PC is in use may cause
damage to the hard disk or a system error.
Cause and Solution
] to turn the [All apps]
] > [System] >
Symptom
Screen brightness This product has a Vari-Bright™ function that extends
changes while the battery life by adjusting screen brightness according
battery mode is in to the user's environment.
use.
If you do not want to use the Vari-Bright™ function,
change the settings as follows.
• Press the Start button [
[AMD Software].
• Turn off the function or change the settings in
[Vari-Bright] in the [
- The [AMD Software] app will be automatically
installed when connected to Internet. The app
name and settings screen may vary depending on
the version of the graphics driver.
The touchpad is
• Press the Start button [
not functioning
[LG Smart Assistant]. Then press [Dashboard] >
properly.
[Touchpad].
• If the touchpad does not function properly, the
touchpad is either in the Touchpad Off (disabled)
state or Touchpad Auto (disabled when the mouse is
connected) state.
- For details on the touchpad settings, refer to the
LG Easy Guide of the LG PC Manuals.
Cause and Solution
] and run [All apps] >
] > [Display] tab.
] and run [All apps] >