GE UVC9360 Owner's Manual & Installation Instructions page 15

STEP 2 RECIRCULATION OPTION (IF USED)
1. Cut a hole into the soffit for the exhaust duct.
2. Install the vent grill over the exhaust duct.
3. Seal the duct joints with duct tape.
Visit GEAppliances.com to order the optional recirculation kit.
In Canada, vision GEAppliances.ca.
90° Angle Boot
STEP 3 FINALIZE INSTALLATION
1. Insert filters, see the Filters section.
2. Check operation of the lights and blower.
3. Finish the custom cabinetry.
49-2000894 Rev. 3
Installation
Hood Center Line
Filters
Soffit Cutout
8" ducting
6-15/16"
11-1/2"
1" = 2.5 cm
15